AlPO-Catalysed asymmetric Diels-Alder reactions of cyclopentadiene with chiral acrylates

Reactions of cyclopentadiene with several chiral acrylates are studied and compared with the same reactions catalysed by Zn(II)-exchanged K10 montmorillonite. In general, amorphous AlPO₄ is a more efficient catalyst than the clay. In particular, the reaction of cyclopentadiene with (−)-8-phenylmenthyl acrylate leads to 74% diastereomeric excess (d.e.) in methylene chloride at low temperatures. This result constitutes the highest asymmetric induction described to date for a solid-catalysed asymmetric Diels-Alder reaction. When the reactions are carried out in the absence of a solvent a noticeable decrease in selectivity is observed, probably due to an extensive competition of the non-catalysed reaction.     

A simple and very sensitive spectrophotometric method for the direct determination of copper ions

A sensitive spectrophotometric method for the direct determination of copper in aqueous samples without a preconcentration step has been developed. It is based on the formation of a yellow complex with the chromogenic reagent di-2-pyridyl ketone benzoylhydrazone (dPKBH) in an alkaline medium. The complex stoichiometry was 1:2 (Cu:dPKBH) and presents maximum absorbance at 370 nm. The influence of chemical variables affecting the behaviour of the system such as pH, concentration of dPKBH, buffer solution and ethanol, order of addition of the reagents and stability of the complex, were evaluated. The molar absorptivity (epsilon) was 3.92x10(4) L mol(-1) cm(-1), and Beer's law was obeyed up to 3 mg L(-1) of copper. The relative standard deviation was 0.46% (n=11) for a sample containing 1 mg L(-1) Cu(II). The limit of detection was 2.5 micro g L(-1) and was therefore more sensitive than the direct methods reported previously. Finally, the method was successfully validated by analysing several real samples with different matrices, such as tap water, natural water or copper alloys, with an average relative error of 2.46%.     

Lead(II) thiocyanate complexes with bibracchial lariat ethers: an X-ray and DFT study

Compounds of formula [Pb(L2)(NCS)2] (1) and [Pb(L4)(SCN)2] (2) (where L2 is the lariat crown ether N,N'-bis(3-aminobenzyl)-4,13-diaza-18-crown-6 and L4 is the Schiff-base lariat crown ether N,N'-bis(3-(salicylaldimino)benzyl)-4,13-diaza-18-crown-6) were isolated and structurally characterized by X-ray diffraction analyses. The X-ray crystal structures of both compounds show the metal ion coordinated to the six donor atoms of the crown moiety, leaving the corresponding pendant arms uncoordinated. The coordination sphere of lead(II) is completed by two thiocyanate groups that coordinate either through their nitrogen (1) or sulfur (2) atoms. The organic receptor adopts a syn conformation in 1, while in 2 it shows an anti conformation. To rationalize these unexpected different conformations of the L2 and L4 receptors in compounds 1 and 2, as well as the different binding modes found for the thiocyanate ligands, we have carried out theoretical calculations at the DFT (B3LYP) level. These calculations predict the syn conformation being the most stable in both 1 and 2 complexes. So, the anti conformation found for 2 in the solid state is tentatively attributed to the presence of intermolecular pi-pi interactions between phenol rings, for which the dihedral angle between the least-squares planes of both rings amounts to 2.6 degrees and the distance between the center of both rings is 3.766 A. On the other hand, the analysis of the electronic structure has revealed that the Pb-ligand bonds present highly ionic character in this family of compounds. They also suggest a greater transfer of electron density from the NCS- ligands when they coordinate through the less electronegative S atom. The Pb-SCN covalent bond formation mainly occurs due to an effective overlap of the occupied 3p z orbitals of the S atoms and the unoccupied 6p z AO of the Pb atom, while the Pb-NCS bonding interaction is primarily due to the overlap of the 6s and 7s AO of Pb with sp(1.10) hybrids of the N donor atoms. Our electronic structure calculations can rationalize the different coordination of the thiocyanate groups in compounds 1 and 2: the simultaneous formation of two Pb-SCN bonds is more favorable for S-Pb-S angles close to 180 degrees , for which the overlap between the occupied 3p z orbitals of the S atoms and the unoccupied 6 pz AO of the Pb atom is maximized.     

Dramatic changes in geometry after ionization: experimental and theoretical studies on the electronic properties of fluorocarbonyl (mono-, di-, and tri-) sulfur compounds

In this work, we present a complete study on He I photoelectron spectroscopy (PES) for the fluorocarbonyl mono-, di-, and trisulfur compounds FC(O)SCl, FC(O)SSCH(3), and FC(O)SSSC(O)F. After optimizations of the structure for stable conformers at different levels of theory, a complete theoretical study involving the calculation of the ionization energies using orbital valence Green's functional (OVGF) was performed. Calculations of radical-cationic forms were carried out in order to compare their properties with those of the neutral molecules. The first IP values are 10.7, 9.0, and 10.5 eV for FC(O)SCl, FC(O)SSCH(3), and FC(O)SSSC(O)F, respectively. The groups bonded to the S atom mainly influence the ionizations originating from the sulfur lone pairs. A wide electronic delocalization in the FC(O)S moiety can be deduced from experimental and theoretical results, which leads to a strong energetic stabilization of the n' '(S) (sulfur lone pair pi orbital). Other conclusions relate to effects on the substituents attached to the S atom and the importance of the molecular planarity in the orbital stabilization of the FC(O)S moiety for the neutral molecules. It is worthwhile mentioning that FC(O)SCl retains its planar structure after ionization, but drastic changes occur in the geometry of both FC(O)SSCH(3) and FC(O)SSSC(O)F. The FC(O)SSCH(3) molecule adopts a heavy atom planar structure after ionization. The FC(O)SSS moiety becomes a planar form after the ionization of the FC(O)SSSC(O)F molecule, whereas the second C(O)F group maintains its original conformation with respect to the SSS group.     

A method to calculate density distribution of adsorption centers from temperature-programmed desorption spectra

A new method to calculate the function of density distribution of adsorption centers according to the activation energies of desorption by using temperature-programmed desorption curves is suggested. The application of this method is exemplified by toluene desorption from ZSM-5 zeolite.

---

, . .

     

Total synthesis of LFA-1 antagonist BIRT-377 via organocatalytic asymmetric construction of a quaternary stereocenter

A catalytic route for enantioselective total synthesis of cell adhesion inhibitor BIRT-377 is described. The quaternary stereocenter was constructed through l-proline-derived, tetrazole-catalyzed direct asymmetric alpha-amination of 3-(4-bromophenyl)-2-methylpropanal with dibenzyl azodicarboxylate. In the course of these studies, a one-pot trifluoro acetylation/selective benzyloxycarbonyl deprotection method was developed. [structure: see text]     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Clean osmium-catalyzed asymmetric dihydroxylation of olefins in ionic liquids and supercritical CO2 product recovery

The combination of ionic liquids (ILs) as solvents in the asymmetric Sharpless dihydroxylation (AD) with the use of scCO(2) in the separation process allows a very simple, efficient, clean and robust system for the reuse of the AD catalytic system, which also does not need the use of organic solvents either for the reaction or for the separation of products and allows the isolation of the diol, in high yield and enantiomeric excess and basically without contamination with osmium.     

Development of a gas chromatography/ion trap mass spectrometry based method for the quantification of polybrominated diphenyl ethers and polychlorinated biphenyls in adipose tissue

A combined gas chromatographic mass spectrometric (GC/MS/MS) method for the determination of seven polybrominated diphenyl ethers (PBDEs) and seven marker polychlorinated biphenyls (PCBs) in adipose tissue has been developed. Adipose tissue was melted and filtered through anhydrous sodium sulphate to obtain pure fat. Clean-up was performed using a glass column containing acidified silica, deactivated alumina and anhydrous sodium sulphate. Polybrominated biphenyl (PBB) 155 and Mirex were added as internal standards for PBDEs and PCBs, respectively. Injection standards, PBB 103 and PCB 143, for PBDEs and PCBs, respectively, were added before analysis with GC/MS/MS. The developed GC/MS/MS method has the advantage of being more selective than single MS methods because matrix effects are largely eliminated. Validation of this method was conducted according to Commission Decision 2002/657/EC. Decision limits for PBDEs and PCBs ranged from 0.06-0.15 ng g(-1) and from 0.35-1.22 ng g(-1), respectively. Detection capabilities were all between 0.23-0.55 ng g(-1) for PBDEs and between 0.98-2.29 ng g(-1) for PCBs. Precision, recovery, bias and selectivity were tested, with satisfactory results.     

Fused pyrazolopyrimidines. I. Pyrazolo[4,3-e]-v-triazolo[1,5-a]pyrimidine. A new heterocyclic system

5-Azido-4-cyano-1-phenylpyrazole reacts with benzylcyanide in the presence of sodium methoxide to give the title ring system.